2HP Twin Brass Impeller Centrifugal Pump with High Quality

SCM2-55 TWIN IMPELLER CENTRIFUGAL WATER PUMPS


Applications & Installation

This series centrifugal pumps are with double back-to-back impellers to gain energy. They are suitable for both domestic and industrial applications to pump clean liquids and non-aggressive chemical fluids. Particularly be used for pressure boosting washing systems, feeding boilers, cooling and fire-fighting units ,chiller and refrigeration systems.  


.

Performance
 
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass 
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide


Notes
Pumps should be installed in a dry and covered area, protected against the weather.




FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.





  SCM2-55 TWIN IMPELLER CENTRIFUGAL WATER PUMPS


Applications & Installation

This series centrifugal pumps are with double back-to-back impellers to gain energy. They are suitable for both domestic and industrial applications to pump clean liquids and non-aggressive chemical fluids. Particularly be used for pressure boosting washing systems, feeding boilers, cooling and fire-fighting units ,chiller and refrigeration systems.  


.

Performance
 
Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: Aluminum alloy
★ Impeller: Brass 
★ Shaft :45# steel/Stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide


Notes
Pumps should be installed in a dry and covered area, protected against the weather.




FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.





 

Tooling refers to the general name of various tools used in the manufacturing process, including tools / fixtures / molds / gauges / inspection tools / auxiliary tools / fitter tools / station tools and so on.

Fixture: A device used to clamp a workpiece (or guide a tool).

Mold: A device used to define the shape and size of a production object.

Tools: The tools used in machinery manufacturing are basically used for cutting Metal Materials.

Auxiliary tools: Generally refers to the tools used to connect the tool with the machine tool.

Fitter tools: a general term for various tools used in the fitter industry.

Station tools: Various devices used to store production objects or tools in the work place or warehouse.

Gauge: An instrument used for inspection during production.

Work Fixture Prototype

Clamping Tools Gear,Jig And Fixture,Fixture Stainless Steel,Cnc Bakelite Fixture

Guangdong Shunde Teamwork Model Technology Co., Ltd , https://www.gdtwmx.com