Generally speaking, in the numerical control measurement, as a bridge connecting the probe and the computer, the following requirements must be met. The filtering function must be provided, because the electromagnetic interference phenomenon is inevitable in the actual application site, and the filtering circuit on the interface board is to interfere with these interferences. Clear or reduce to the least extent.
Must have analog-to-digital conversion for effective communication with the computer.
The counting function must be available because the amount of deformation of the probe is dictated by the number of pulses.
An interface circuit to the computer must be provided for the computer to sample.
Of course, different interface boards should be used for different probes. Since one-dimensional inductive probes are used, only the corresponding interface board circuits are introduced. The sum is a sine wave signal, and after being shaped by a zero-detection circuit, it becomes a square wave as shown in the figure. At this time, the basis of computer sampling has been laid. Since the square wave from the zero-crossing detection circuit is too rough and the square wave is quite similar to the forest, it cannot meet the requirements of the profiling measurement, so the waveform is required to be subdivided, and the square wave equivalent is reduced. This is done here with a quadruple frequency circuit.
After the waveform is subdivided, the square wave is equivalent to the determination of the direction of the offset of the probe. It can be realized by judging the relationship between the zero-crossing detection circuit and the two signals. If it is detected first, the probe is in the positive direction. Offset, otherwise the probe is offset in the negative direction. Of course, the relationship with the offset direction is artificially set and can be set in the opposite relationship.
(Finish)
DongGuang Flag King manufacture Co.,Ltd was found in 2003,specilize in manufacturing and exporting wide range of flags, which can meet different requirement of client from all of world. Our company adopt the most advance flag Dyeing and Finishing technology, combine with the professional auto-silkscreen printing and specific hand-making printing methods, to produce National flags, Logo flag,Advertising banners& flags,Signal flags,Army flags,Hand flags,Car FLAG,Beach flag,Christmas flag ,etc. In addition,we also provide Alloy Tent and the pole for Car flag&Hand flag and other accessories . We equipped with advance automatic screen printing machine, inkjet screen making machine, autowashing & heatsetting machine which allow us to make the flag size up to 2*6 meters with 7 colors. Our factory occupy the area of 3000 square meters, employ about 200 works,provide the production daily capacity for 12000 ~15000 square meters. To protect the environment,we also build the water recycling system according to the standard of national environment protection. With the reputation of products quality and creditability since settled, we have made the project of supplying flags for: the 10th national Games of china, the world table-tennis Championships, 2004 Athens Olympic games, 2008 Euro-Championships, 2008 Beijing Olympic Games and Vancouver 2010 White Olympic Games. As a leading manufactory certificated by ISO9001 in china,we are known as the best quality, the reasonable price, and the fastest delivery. Now our products already exported to all around world ,such as:Germany , Sweden , Switzerland, Belgium, Iceland ,Canada, Australia ,USA,UK,UAE,HongKong an Macao. We will always assure of you to provide the best quality and service. Welcome to contact us,for any question, in any time!
custom logo flag,logo with flags，business logo flags,outdoor flags for flagpole，outdoor flagpole
FlagKing Flags Manufacturing Co.,Limited , https://www.dgcnflagking.com