After careful examination, found that the fault lies in the carburetor acceleration pump. The process is as follows: First observe the carburetor throttle accelerating rod connecting rod (plunger) or speed nut (diaphragm) is off. Then, remove the air filter, use a cardboard box twisted into a small paper stick, insert the throat, the other hand toggle the throttle lever, take out the paper stick, paper stick is not wet, indicating that the acceleration pump is not Out of oil, remove the acceleration nozzle screws, dial gently with a thin copper wire check valve weight, and then dial throttle throttle rod, if still not fuel injection, indicating damage to the pump bowl damaged or blocked oil. Oil spray, the check valve wear stuck, put on the check valve can be. This is because the check valve wear and tear after the closed lax, so that the mixture is enriched, not only increase fuel consumption is often difficult to start the car.
Except metal Briquette Machine, Metal Baler and metal shear, we also provide catalytic converter decanner, aluminum Shredder or steel shredder equipped with briquette machine, and vertical aluminum profile baler, horizontal non-metal plastic and paper baler. With 30 years experience, we have much experience on kinds of recycling machines.
Metal Processing Machine,Iron Processing Machine, Steel Processing Machine, Copper Processing Machine, Scrap Processing Machine
Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycling.com