July 15, 2015, the Central gum rubber recycling (Qingdao) Co., Ltd. independent research and development of environmentally friendly ton of waste recycled rubber tire equipment successful trial production. This is the first domestic continuous closed reclaimed rubber production line, and all the indicators have completely met the national environmental protection and energy saving requirements.
China's 10,000-ton waste tire reclaimed rubber equipment has been successfully tested
The company’s general manager, Guo Suyan, introduced that by means of closed and continuous equipment, it is possible to eliminate waste gas, liquid waste, dust, and noise to achieve cleaner production, and to separate personnel, machinery, and materials to achieve the goal of safe production. It is particularly important that this lays the foundation for automation and makes intelligentization possible.
The intelligent program control pre-processing system designed by the company can realize the continuous transportation of raw materials and oil, automatic and accurate measurement, and has the advantages of even mixing and better pre-heated permeability, which provides guarantee for the production of high-quality recycled rubber. In addition, its continuous regeneration equipment adopts a unique flexible self-adaptive spiral structure. In the production process, the spiral can not only scrape off the glue powder adhered on the cylinder wall, but also make the rubber powder adhering to the spiral off by its own axial displacement. Effectively extend the continuous use of equipment.
Wang Yangzuo, former deputy director of the National Environmental Protection Agency, pointed out that the equipment has greatly subverted the current situation of traditional reclaimed rubber production, and achieved full implementation of environmental protection and energy saving goals in terms of the intelligence of raw materials, reagents, and production. The next step should be officially put into production through remodeling or new production lines. .
Advantages:
The advantage of Self Reparing High Speed Doors are self-reparing,easy to clean,complete safe,energy saving and so on.
If the door curtain comes out of its guides(for example in the event of impact with a forklift),the system will reset the cutrain back intp the guide during the next opening cycle autimatically
Motor System:
Germany Famous Brand-SEW
Power Supply: 0.75kw, 1.5kw, 2.2kw
The incremental encoder mounted is attached to the end of the drum shaft.
Self-Repairing Door Curtain:
Made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
| PVC Curtain |
Grey,Yellow grid,Purple,Green,Light green,Black,Perforated Yellow grid,White,Blue,White grid,Sky Blue,Yellow,Orange,Red
Color curtain:0.8mmthickness. Function:insect prevention |
||||
Auto Recovery High Speed Door,self-recovery high speed door,self-repair high speed door, high speed zipper door, zipper high speed door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrs.com