The combination sensor is a package of a variety of sensor products, so that you can collect a variety of signals, saving space and reducing costs. Nowadays, these sensors are used in electronic products with high price pressure or limited circuit board space, such as mobile phones and tablet computers. In the future, the six-axis inertial sensor measurement unit (IMU) will become a mainstream application and play a greater role.
There is also the application of certain products that are forced to use specific technologies. Cost is a decisive factor. Just like the automotive industry, the annual demand is large. If the results are too high, it will put a lot of pressure on auto manufacturers. In order to save costs, the combination of sensors is the best choice. With the development of the automotive industry, the growth momentum of combination sensors will also continue to soar.
In addition, there are combination sensors used in the security industry. The security industry is now second only to the automotive industry, becoming the second fastest growing area for sensors. It is precisely because of the expansion of product performance requirements in these areas that the development of combination sensors has been brought about. With the continuous expansion of future applications, hidden business opportunities will be inestimable. As of now, there are still many vacancies in the combined sensor market, which gives manufacturers great opportunities.
99% Purity Industrial Oxygen Generator
Gamma 99% Purity Industrial Oxygen Generator is used to produce oxygen with purity up to 99%. It is the combination of standard 93% purity oxygen generator with one oxygen purifier. Detailed parts combination is as below:
Air Compressor
Function: provide compressed air source for the PSA Oxygen Generator, the flow and pressure are to be decided by the desired oxygen flow rate, purity, outlet pressure. As it is the air source of whole system, the performance of air compressor has remarkable influence to the whole oxygen generator system. Air source must be stable, sufficient with pressure not less than 7.5 bars.
Compressed air treatment part
Function: get rid of water, oil, impurities in compressed air coming from the air compressor, providing clean, dry, oil-free compressed air for the PSA oxygen generation part. It includes 3 filters, 1 refrigerated dryer and 1 activated carbon oil remover. After treatment, dew point of compressed air can reach -20 degree (normal pressure) , dust content is not larger than 0.01mg/m3, solid particles diameter is not larger than 0.01μ, oil mist content is not more than 0.003mg/m3.
Air tank
Air tank function:
It quickly increases the pressure of adsorber;
It also stores gas for air compressor, buffers system pressure;
PSA oxygen generation partFunction:
It is the key part of whole system. In this part, the oxygen is separated from compressed air, sent to buffer tank as produced gas. Nitrogen, carbon dioxide, argon,etc are discharge from muffler as exhausted gases. The efficiency of this machine is mainly decided by adsorption tower structure, air distribution structure, molecular molecular sieve performance, process flow, etc.
O2 buffer tankO2 buffer tank function:
It balances pressure fluctuation, ensure stable oxygen supply;
With oxygen re-blowing system, the O2 buffer tank can also quickly increases the pressure of adsorption towers.
PSA oxygen storage tank 1Function:
To help the performance of oxygen purifier, one oxygen storage tank is supplied.
Oxygen purifierFunction:
This is another key part for the high purity oxygen generator. After its treatment, 99% purity oxygen is achieved.
Oxygen storage tank 2
Function:
After treatment of oxygen purifier, the 98% purity oxygen has very low pressure, for getting higher pressure, another oxygen storage tank is supplied.
Oxygen CompressorFunction:
As the 99% purity oxygen pressure is very slow, to get 150 bars pressure, one oxygen compressor is needed.
Oxygen filling station
Function
It is used to fill the high pressure oxygen into cylinders for storage or selling.
High purity industrial Oxygen Plant specification:
Oxygen purity: 99%
Oxygen flow rate: 5-100 Nm3/Hr
Oxygen outlet perssure: 5-200 bars99% Purity Industrial Oxygen Generator,Onsite Oxygen Generators,Industrial PSA Oxygen Generator,Oxygen Generators CE
Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagases.com