Recently, Daqing Volvo Car Manufacturing Co., Ltd. and Volvo Car Sales (Shanghai) Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall from May 20, 2017. The following vehicles, a total of 6,326 vehicles:
(1) Daqing Volvo Car Manufacturing Co., Ltd. recalled some domestically produced 2017 S90 long-wheelbase vehicles produced between November 17, 2016 and February 28, 2017, totaling 3,843 vehicles;
(2) Volvo Car Sales (Shanghai) Co., Ltd. recalled some imported 2017 S90, V90 Cross Country and XC90 vehicles produced from November 21, 2016 to March 1, 2017, totaling 2,843 vehicles.
Due to the supplier's problem, the vehicles in the scope of this recall may have deviations in the surface treatment process of the safety curtain fixing bolts, which may cause the bolts to be easily broken. If the vehicle uses one or more defective bolts, the bolt may break and may cause an abnormal noise during driving. If the vehicle collides, the safety air curtain may protect the occupants from lower than expected, posing a safety hazard. Daqing Volvo Car Manufacturing Co., Ltd. and Volvo Car Sales (Shanghai) Co., Ltd. will replace the affected bolts on the vehicles within the recall to eliminate potential safety hazards. Stock vehicles will be sold after the elimination of hidden dangers.
Daqing Volvo Car Manufacturing Co., Ltd. and Volvo Car Sales (Shanghai) Co., Ltd. will notify customers by registered mail. After the official start of the recall, Volvo authorized dealers will contact the relevant owners to arrange the recall. Users can call Volvo's after-sales service hotline 400-678-1200 for consultation. Owners can also visit the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2) to reflect the problems in the implementation of the recall activity or to submit defects.
CH/CS Cone Crusher
(1) CH/CS Cone Crusher is a single cylinder hydraulic structure. The equipment is designed according to heavy-duty working conditions. The main shaft is supported at the upper and lower points, and the stress conditions are good.
(2) The constant crushing chamber (CLP) design keeps the feeding and production capacity constant during the liner wear cycle, significantly reducing the operating cost.
(3) Up to ten kinds of cavity shape changes and up to four kinds of eccentricities can be set for an eccentric sleeve bushing, which greatly enhances the flexibility and adaptability of the equipment.
(4) Equipped with intelligent ore outlet adjustment system ASRI, the performance of the crusher can be maximized.
(5) Advanced liner wear monitoring and automatic compensation functions, operation data record query functions, and convenient network communication functions can significantly improve the maintenance level of equipment and optimize the coordination and control with other equipment in the system.
(6) Compared with CH type, CS type crushing chamber is higher and steeper, with larger feed inlet and larger carrying capacity. It is suitable for secondary crushing when the feed particle size is large. Its lower frame is interchangeable with CH crusher of the same specification.
Bushing Parts,Coupling Parts,Pump Parts,Dust Collar
Shenyang Ule Mining Machinery Co., Ltd , https://www.ulecrusherparts.com