Development of Spray Dryer in Dairy Industry Production The spray dryer was first used in the milk powder industry in 1901. It was only used in the production of the powdered milk industry in the 1920s. It began to be used in China in the late 1940s. The earliest structure belongs to the pressure box type (horizontal type). The atomization of the material is a two-fluid type, and the power consumption is large. By 1958, the Ministry of Light Industry in Heilongjiang Province promoted animal husbandry to produce milk powder using a small pressure spray drying method. In 1955, the Harbin Songhuajiang Milk Factory produced milk powder for the first time using a centrifugal spray method. The two types of spray dryers were flat-bottomed structures at the time, and the powder was batch-typed, and each powder was artificially powdered for every shift.
In the mid-1960s, box-type pressure drying equipment appeared in the form of a conical bottom with a spiral powder extractor (auger). The first vertical multi-sprayer pressure spray dryer was born in the early 1970s. Its appearance reduced the effective volume of the spray dryer by nearly half, and produced powder continuously without stirring the dragon. In the 1980s, a single-spray vertical pressure spray dryer was also produced. Its application in the milk powder industry is a key step in promoting the technical progress of China's milk powder industry and lays a foundation for promoting the rapid development of China's milk powder industry.
In the spray drying process, the material is pumped into the spray dryer and dispersed by the atomizer into small droplets. After the air is heated, it is sent to the drying chamber and mixed with the material mist. After the drying process, the dried product is separated. After storage or put into use directly. The powdered milk produced by the spray drying method is a uniform powdery product, and it can be packaged directly into a finished product without the need of drying, cooling, smashing, etc., and the production process of milk powder is mechanized, continuous, and large-scale. The surface temperature of the material will not be too high and the quality of the milk powder product will be improved. Therefore, the spray dryer plays an enormous role in the production of the milk powder industry, and there is a tendency for the amount of dry water to increase. However, spray drying is a highly energy-consuming process, and because the product quality after drying is high and the moisture content does not fluctuate greatly, it is required to strictly control the drying temperature and other operating parameters. Therefore, the correct selection and operation and control of the spray dryer are required. The rational design of the system is essential to ensure product quality, energy conservation and consumption reduction, not only to contribute to the promotion and promotion of scientific and technological progress and development of the dairy industry in China, but also to promote and promote scientific and technological progress and development in other industries. The economic growth of the motherland has made even greater contributions.
Pneumatic Air Chain Hoist With Trolley
In any environment where safety is a priority, the ITA pneumatic hoist is the best choice. Compared with current driving, using compressed gas as the driving medium will not produce any sparks. The characteristics of this structure make Makita ITA pneumatic hoists especially suitable for working in hazardous environments. ITA pneumatic hoist products are very strong and reliable, so they are suitable for use in harsh industries and even in connected conditions. According to different needs, we have different controllers and rollers. For lateral loading, we have a variety of lines. Walk the trolley to meet your needs.
Applicable industries of pneumatic hoist: aircraft manufacturing, assembly line, chemical industry, dairy processing factory, electroplating factory, fireworks factory, food industry, foundry, furniture factory, glass industry, paint factory, match factory, mechanical engineering, automobile industry, Oil depots, onshore and offshore operations, paint shops, paper industry, power plants, finishing plants, sawmills, shipbuilding, space technology, steel mills, textile industries.
Standard configuration EXI12GDIIAT4/II3GDIIBT4
Enhanced spark protection configuration: EXII2GDIIBT4
Enhanced spark protection for explosion protection group IIC configuration: EXII2GDIICT4
Pneumatic Air Chain Hoist With Trolley,Air Push Hoist,Chain Hoists For Mining Industry,Chain Hoist With Hook Mounted
Hengshui Tianqin Import and Export Trade Co.,Ltd , https://www.itahoists.com