Kejia talk about how to connect several lightning protection devices

As we all know, the signal lightning protection device is used to protect a variety of electrical equipment in the power system from lightning over-voltage, over-voltage operation, transient over-voltage power frequency damage and an electrical appliance. With the popularity of signal communication equipment applications, signal lightning protection devices have become a weapon to protect electronic devices. However, many people understand the signal lightning protection wiring harness. The following small series will use the wiring diagram of the lightning protection device of Kejia Electrical Signaling Co., Ltd. as an introduction:

Network signal lightning protection device <br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br> Network signal lightning protector Ethernet communication lightning protector can be used for lightning protection of network interface of communication equipment. , Play lightning protection.
Figure 1: Network signal lightning protection device wiring diagram

Installation Precautions: Lightning protector is installed in the protected inlet port, in series with the network signal line, the input terminal is connected to the external lead, the output terminal is connected to the protected equipment, and the “PE” lead on the lightning arrester must be connected to the nearest The earth terminals are reliably connected to ensure lightning protection is effective.

Digital signal lightning protection device <br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br> The external signal is terminated to the input line, the output is terminated to the protection device, and the PE terminal is to be reliably connected to the earth lead.


Figure II: Digital signal lightning protection device wiring diagram

Analog signal lightning protector

The lightning protection of analog signals is based on the different characteristics of sensors, transmitters, and signal collectors and can be used for lightning protection of 2- to 4-wire analog signal lines. The terminal wiring lightning arrester is suitable for indoor installation; it is mainly made of stainless steel lightning arrester suitable for outdoor installation, and has a fully enclosed structure that is resistant to acid and corrosion.

Figure 3: Installation of lightning protection device for analog signals

SPD <br> <br> video composition which is a video signal SPD and AC / DC power supply arrester as one, become the imaging means and a video surveillance system generation apparatus compact, multifunction anti Lei products, the use of new types of lightning protection components, constitute multiple protection circuits, applicable to a variety of equipment for lightning protection devices and interface forms.

Figure 4: Video combination signal wiring diagram

It should be noted here that all lightning protector installation wiring must be well grounded, and regular safety inspections should be conducted to ensure reliable lightning protection.

Glue Making Machine

Glue Making Machine is made of high-density polyethylene PE, which is non-toxic, odorless and guaranteed in quality.

glue making machine

1. Frame

The outer frame is welded and formed by hot-dip galvanized steel pipe (all steels of Ansteel 51D+Z and 53D+Z models), and the bottom tray is fixed by anti-skid screws (grade 8.8), which is strong, durable and corrosion-resistant. The 2mm thick bottom middle beam provides strong support to ensure the safety of the tonnage during transportation. Reasonable structure, can be loaded and unloaded by forklift.

2. Valve

The container is equipped with a plastic valve. The valve material is acid and alkali resistant, suitable for the discharge of various liquids.

3. Stirring port

The stirring port of the container is equipped with a lid, which can be covered when not stirring for easy storage. The stirring port is 150mm.

4. Feeding port

The lid equipped with the feeding port of the container can be covered to prevent the liquid from overflowing when the feeding port is not feeding, and the feeding port is 350mm.

5. Liner

Large-capacity packaging, using water (density of 1) as the medium, each can be filled with a weight of one ton (take 1000 liters as an example);

The volume scale is cast on the inner tank, and the user can clearly see the full height of the liquid in the container by using the transparent characteristics of the container.

Anti-ultraviolet, anti-aging, easy to clean, non-toxic, high strength, corrosion resistance, good hygiene, safe and reliable;

Automatic Mixing Equipment,Glue Making Machine,Glue Powder Mixing Equipment,Mixer Powder Machine

Zhengzhou Enlin Import And Export Trade Co., Ltd , https://www.enlintrade.com