According to a recent report by the American Physicists Organization Network, researchers at Stanford University immersed a common cotton yarn in a mixture of silver nanowires and carbon nanotubes to create an efficient, inexpensive new type of water purification filter. Kill 98% of the bacteria in the water, sterilization speed is 80,000 times the traditional microporous mesh filter. The research results were published in the recently published Nano Express newspaper.
Carbon nanotubes have good conductivity, and more than 98% of E. coli bacteria will be killed if they spend a few seconds in a 20-volt current. Silver can also be sterilized. Prior to pasteurization and the appearance of refrigerators, people often placed a silver coin at the bottom of the milk bottle to disinfect.
Sarah Haiershaw of Stanford University's Materials Research Bioengineering Experts Group said that carbon nanotubes and silver, both of which are made of materials that work together, maximize the bactericidal efficacy. The silver nanowires can kill any bacteria trapped in the pores, thus avoiding the common deficiencies of conventional filters, ie, bacteria can form biofilm on the filter and thus deface the device.
Traditional filters use physical methods to adsorb bacteria. The cotton fibers contained in the new filter are coated with a “nano coat,†which forms an electric field that kills bacteria that flow through, and cotton fibers have multiple layers. Up to 6.4 cm, enough to kill most bacteria in the water.
According to Cui Yi, an associate professor of materials science and engineering at Stanford University, the cost of this new filter is also very low. On the one hand, the silver used for silver nanowires is very small and the cost is almost negligible. On the other hand, the required current is very small. The adsorption of nanomaterials is very high. The longer end of the silver nanowire is connected to the nanotube, and the other end extends into the gap in the middle of the cotton fiber. A smooth and gap-free coating is formed on the cotton fiber. The conductive effect is very good. Therefore, the current intensity is only a few milliamperes, a small solar cell or a pair of 12-volt car batteries can satisfy. The traditional filter uses an electric pump to pump water into the micro-holes, which consumes a large amount of electricity. In the laboratory, the equivalent amount of water is filtered. The new filter consumes only one-fifth of the power of conventional filters.
Cui Yi also said that the purification speed of the new filter is very fast. The filter pores of traditional filters are very small, and it is very easy to block micropores when bacteria are adsorbed and separated from water. The new filter has large pores that only kill bacteria but does not adsorb bacteria. Therefore, it will not slow down the flow of water. Water speed is 80,000 times that of conventional filters. This type of filter is practical in remote areas where chlorine cannot be used to disinfect water, and it can greatly reduce the spread of diseases such as cholera, typhoid, and hepatitis that are transmitted through water as a medium.
YIEN CNC flat bed lathes are a type of computer numerical control (CNC) machine that is used for machining cylindrical parts. These lathes have a flat bed design, which means that the workpiece is mounted horizontally on the lathe bed.
The CNC Flat Bed Lathe is equipped with a computer control system that allows for precise and automated machining operations. The operator can input the desired dimensions and specifications into the control system, and the machine will automatically perform the necessary cutting, drilling, and turning operations to produce the desired part.
Some of the key features of CNC flat bed lathes include:
1. Precision machining: CNC flat bed lathes are known for their high precision and accuracy. The computer control system ensures that the machining operations are performed with tight tolerances, resulting in high-quality finished parts.
2. Versatility: These lathes are capable of machining a wide range of materials, including metals, plastics, and composites. They can handle both small and large workpieces, making them suitable for a variety of applications.
3. Automation: The CNC control system allows for automated machining operations, reducing the need for manual intervention. This increases productivity and efficiency, as well as ensures consistent and repeatable results.
4. Multi-axis capabilities: Many CNC flat bed lathes are equipped with multiple axes, such as X, Y, and Z axes, as well as live tooling capabilities. This allows for complex machining operations, such as milling, drilling, and tapping, to be performed in a single setup.
5. Easy programming: CNC flat bed lathes typically use G-code programming language, which is widely used in the industry. This makes it easy for operators to program the machine and create complex part geometries.
Overall, CNC flat bed lathes are highly versatile and efficient machines that are widely used in various industries, such as automotive, aerospace, and manufacturing. They offer precise and automated machining capabilities, allowing for the production of high-quality parts with minimal manual intervention.
Cnc Flat Bed Lathes,Flat Bed Cnc Lathes,Cnc Slant Bed Lathe,Flat Bed Cnc Lathe
Ningbo Yien Machinery Co., Ltd , https://www.yienmachinery.com