This pipe extrusion line suits to produce the polyolefin pipe as HDPE, PP,PE etc in high production speed. It is of low power consumption, high output, high automation and reliable production.
Equipped the high efficiency single screw extruder designed by us according latest technology and our innovation.
Optimized spiral die ensure the melt distribution uniform to make the pipe wall uniform and guarantee the pipe pressure. Equipped copper Vacuum calibration sleeve with water lubrication ring, twin-chamber vacuum tank with spraying cooling and semicircular Nylon support, to ensure fast calibration, increase the production capacity and lower the operation. These designs are especially good for big diameter pipe production and high speed production.
All of vacuum tank and water cooling tank is made from stainless steel, dual water supply pipe line with filtration system, water level and temperature control system and optimized positioning of the bayonet-type spray nozzles.
The twin or multi caterpillar haul-off unit is equipped with high quality rubber block or rubber belt(for high speed production) accuracy driving and control system ensure the speed stable and running reliable.
Accurate non-scrap Cutting Machine (less than 160mm) and planetary cutting machine ensure the cutting section smooth and uniform.
Model | Diameter(mm) | Output(KG/H) | Speed(M/MIN) |
PVC-63Â | 16-63Â | 120 | 15 |
PVC-800Â | 315-800Â | 900 | 1 |
For more information, please kindly contact as below:
Â
Mobile: 0086-13917356326
 Product Introduction
This pipe extrusion line suits to produce the polyolefin pipe as HDPE, PP,PE etc in high production speed. It is of low power consumption, high output, high automation and reliable production.
Equipped the high efficiency single screw extruder designed by us according latest technology and our innovation.
Optimized spiral die ensure the melt distribution uniform to make the pipe wall uniform and guarantee the pipe pressure. Equipped copper Vacuum calibration sleeve with water lubrication ring, twin-chamber vacuum tank with spraying cooling and semicircular Nylon support, to ensure fast calibration, increase the production capacity and lower the operation. These designs are especially good for big diameter pipe production and high speed production.
All of vacuum tank and water cooling tank is made from stainless steel, dual water supply pipe line with filtration system, water level and temperature control system and optimized positioning of the bayonet-type spray nozzles.
The twin or multi caterpillar haul-off unit is equipped with high quality rubber block or rubber belt(for high speed production) accuracy driving and control system ensure the speed stable and running reliable.
Accurate non-scrap cutting machine (less than 160mm) and planetary cutting machine ensure the cutting section smooth and uniform.
Model | Diameter(mm) | Output(KG/H) | Speed(M/MIN) |
PVC-63Â | 16-63Â | 120 | 15 |
PVC-800Â | 315-800Â | 900 | 1 |
For more information, please kindly contact as below:
Â
Mobile: 0086-13917356326
Â
Dear Customer:
Since you are using the wax static barrel produced by our company, please feel
free to give feedback or suggestions after use, we will thank you for your
support. Before using this
equipment, please read the following carefully, which will be of great help to
equipment problems in the future.
1. The voltage used by this device must meet the national grid power supply
standard.
2. The device must be worn with relevant protective measures during operation.
3. The operator must read this manual carefully before use, and strictly follow
the operation regulations.
Wax Insulation Barrel,Wax Melt Machine,Wax Static Bucket,Wax Casting Mixture Machine
Dongying Dosun Mechanical Automation Co.,LTD , https://www.dosunmachinery.com