The rail-type temperature transmitter usually uses a two-stage piston pusher centrifuge. The operation should pay attention to:
1: Feeding amount, 2: Feeding concentration, 3: Pushing times, 4: Current, 5: Oscillation 6: Temperature rising, 7: Scrubbing water size specification above:
1) Regarding the separation of different suspensions, there should be certain concentration requirements (concentration ≤ 45%) when the feed is oversized or the concentration is too low. If the suspension is too late to separate, an overflow phenomenon will occur and the machine will oscillate. In this case, reduce the feed or increase the feed concentration.
Changes in the number of feeds will affect the output value and the moisture content of the filter cake. With regard to the finer particles, the number of feeds may be appropriately decreased to increase the time the filter cake stays in the machine, and the moisture content is decreased, while the amount of moisture is relatively high. The particulate material can be used to increase the number of feeds and obtain a higher output value. After conditioning, the optimum number of feeds is selected and the conditioning must be performed under discharge. F4QH4T.A!r
3) After interchangeable pulleys, there can be a variety of rotation speeds, habits are not the same as the needs of the material.
4) When the temperature of the hydraulic oil rises, the cooling water valve should be opened in time to maintain the working temperature of the oil at 20°C~50°C. After conditioning, the rail-type temperature transmitter allows the host to operate in the best possible condition. The operator should always pay attention to the investigation of machine operations and separation conditions to make it stable in this state, focusing on the operating current of the motor, oil temperature, and oil. Pressure, etc. should not exceed the rated value and the specified value. When the filter cake needs to be washed, the water valve can be opened to adjust the flow rate and the direction of washing water. The best scrubbing effect can be obtained.
5) When the filter cake is not discharged smoothly (blocking of the discharge pipe, etc.), it should be promptly arranged or shut down.
After the machine works normally, it should be cleaned at least once per shift (work 5-8 hours). The first and second stage drums and other required cleaning areas should be cleaned and cleaned. The flushing time is usually 3-5 minutes.
1: Feeding amount, 2: Feeding concentration, 3: Pushing times, 4: Current, 5: Oscillation 6: Temperature rising, 7: Scrubbing water size specification above:
1) Regarding the separation of different suspensions, there should be certain concentration requirements (concentration ≤ 45%) when the feed is oversized or the concentration is too low. If the suspension is too late to separate, an overflow phenomenon will occur and the machine will oscillate. In this case, reduce the feed or increase the feed concentration.
Changes in the number of feeds will affect the output value and the moisture content of the filter cake. With regard to the finer particles, the number of feeds may be appropriately decreased to increase the time the filter cake stays in the machine, and the moisture content is decreased, while the amount of moisture is relatively high. The particulate material can be used to increase the number of feeds and obtain a higher output value. After conditioning, the optimum number of feeds is selected and the conditioning must be performed under discharge. F4QH4T.A!r
3) After interchangeable pulleys, there can be a variety of rotation speeds, habits are not the same as the needs of the material.
4) When the temperature of the hydraulic oil rises, the cooling water valve should be opened in time to maintain the working temperature of the oil at 20°C~50°C. After conditioning, the rail-type temperature transmitter allows the host to operate in the best possible condition. The operator should always pay attention to the investigation of machine operations and separation conditions to make it stable in this state, focusing on the operating current of the motor, oil temperature, and oil. Pressure, etc. should not exceed the rated value and the specified value. When the filter cake needs to be washed, the water valve can be opened to adjust the flow rate and the direction of washing water. The best scrubbing effect can be obtained.
5) When the filter cake is not discharged smoothly (blocking of the discharge pipe, etc.), it should be promptly arranged or shut down.
After the machine works normally, it should be cleaned at least once per shift (work 5-8 hours). The first and second stage drums and other required cleaning areas should be cleaned and cleaned. The flushing time is usually 3-5 minutes.
Plate loaded machine, also known as maintenance free weights plate loaded machine. The characteristic of this equipment is maintenance free, suitable for use in gyms, hotel gyms, and homes.
The design of the hanging force device considers safety and practicality, using high-quality Q235 elliptical tube steel as raw material and environmentally friendly PU seat cushion, making the device more comfortable and durable.
What is a plate-loaded machine?
Plate-loaded machines allow users to use move the weights from machine to machine, thus allowing gym owners to purchase weight plates separately. These gym machines are also designed to support heavy loads and are known for their sturdiness.
Why are plate loaded machines better?
One of the many pros of plate-loaded fitness equipment is the weight flexibility. Users can load and offload as many weights as they see fit. Selectorized strength equipment also offers some weight flexibility, but it has limitations, offering only a selection of maximum and minimum weights.
What is the difference between plate loaded and weight stack functional trainer?
Weight plate-loaded machines let you add conventional weight plates as required, offering flexibility in weight selection. On the other hand, weight stack machines come with an integrated weight system, where the weights are fixed and part of the machine, limiting the ability to customize the load.
What is the difference between plate loaded and lat pulldown machine?
What is the Difference? Both cable machines are similar but do have some differences. The plate loaded machine can be used for a variety of exercises such as tricep cable pulldowns and bicep curls. On the other hand, the selectorised machine has been built solely for performing lat pulldowns and seated rows.
The gym plate loaded equipment sold by Laijian includes:Biceps curl,Seated dip,Incline press,Decline chest press,Shoulder press,Front pulldown,High row,Kneeling leg curl,Leg extension,Linear leg press and other exercise machine.
Plate Loaded Chest Press,Plate Loaded Lat Pulldown,Plate Loaded Squat Machine,Plate Loaded Row
Foshan Laijian Fitness Equipment Co., Ltd. , https://www.laijiangymequipment.com