ACERETECH is and always will be your ideal partner from negotiating to seeking best solutions, from machine installation to maintenance in plastic or rubber size- reduction and recycling field.
ACERETECH offers best technology on size reduction for special applications concerning all kinds of plastic defects.
Enclosure structure:
General Description:
The heavy duty granulators of the GH series offer a wide array of different rotor designs with widths ranging from 700 mm to 1400 mm with a diameter of 700mm. The completely welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, knife mounts and rotor shaft are oversized. The standard V-cut creates a high quality regrind with a very low percentage of fines in the output material. The removable third stator blade is acting as a deflector wedge and allows the machine to be quickly adjusted to different application Other standard features include easily replaceable wear plates in the cutting chamber as well as outboard bearings reducing the risk of contamination.
Rotor:V-shape cutting angle with 5 groups, or 7 groups, 9 groups or 11 groups of rotor blades available to ensure different size-reduction requirement
GH Series Applications:
The wide range of rotors and hopper styles allow the GH machines to be tailored to almost every application in the plastic recycling field. The GH series granulators are mainly used as large central granulators for in house recycling applications to process large thick walled parts in one step or as a second step granulator after a shredder to reach higher throughput rates. When used to grind light materials, such as bottles the throughput can be greatly increased with the addition of ACERETECH force feeding device.For abrasive,contaminated or highly filled materials the machines can be equipped with special wear protections, such as hard facing of the rotor and housing and key parts manufactured from highly wear resistant steels.
ACERETECH, GH series is specially designed for size-reducing all kinds of thick-wall resin, timber, Aluminum Foil in the shape of film, sheet, runner, tubular construction or hollow container. Conveyor belt, ventilator, storage silo and dust collecting system are available for larger output.
GH Series Technical Parameters:
Technical Data |
GH700/700 |
GH700/1000 |
GH700/1200 |
GH700/1400 |
|
 Machine weight in kg approx |
 4500 |
 7100 |
 8200 |
 10600 |
|
 Machine Measure in mm approx. |
2300x2100x 2900 |
2800x2060x 3420 |
2800x2300x 3450 |
2900x2500x 3500 |
Capacity approx. |
500-800 |
800-1000 |
1000-1200 |
1200-1500 |
Feed opening in mm approx |
700x800 |
700x1000 |
700x1200 |
700x1400 |
Standard motor in kw |
55 |
75 |
90 |
110 |
Number of rotor knives |
5x2 |
5/7x2 |
5/7x2 |
5/7x2 |
Number of stator knives |
2 |
2 |
4 |
4 |
Jig for preadjustment of knives |
included |
included |
included |
included |
Standard screen in mm |
10 |
10 |
10 |
10 |
Rotor diameter in mm |
700 |
700 |
700 |
700 |
According to the regulations of the State Grid, the proportion of distributed generation such as photovoltaics and wind power cannot exceed 10% of the grid, and the energy storage system must be added if it exceeds. Since photovoltaic systems and wind power systems do not use energy storage systems when they are connected to the grid for power generation, it will bring some adverse effects to the power grid. These effects become impossible to ignore. Through the analysis of the characteristics of photovoltaic power generation, it can be seen that the influence of photovoltaic power generation system on the power grid is mainly caused by the instability of photovoltaic power supply. The demand for energy storage systems has increased over the years.
The stable operation of the energy storage system is related to the safety and stability of the power grid, so the major energy storage system manufacturers attach great importance to its quality, and among the factors affecting the stability of the energy storage system, the heat dissipation performance is undoubtedly the most important. Trumony focuses on high-power heat dissipation and has rich experience in the R&D and manufacturing of heat sinks for energy storage systems. Trumony`s thermal management engineers can provide heat dissipation solutions from the beginning of the design of the energy storage system, and can also provide cooling solutions for energy storage systems. The system is optimized for thermal performance. By accumulating rich thermal design data, Trumony can provide accurate thermal simulation and thermal management test data.
snake tube for ESS,snake tube for energy storage,serpentine tube for battery pack
Trumony Aluminum Limited , https://www.szaluminumpipe.com