Features:
* Customer friendly operation
* Best exterior construction and good appearance* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:
Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
| Accuracy for the unit | ±0.25% |
| Flow rate | 45Â ~80L/min |
| Ambient temperature | -25ºC~ +55ºC; -40ºC ~ +50ºC |
| Relative humidity | 20% -Â 95% |
| Unit noise rate | < 70dB (A); |
| Inlet vacuum rate for   suction pump | >=54kPa |
| Communication | With RS 485 port, or current loop |
| Power supply |
AC 220V(   -15%~+10%),(50/60±1)Hz ; AC 380V( -15%~+10%); (50/60±1)Hz |
| Digit of sale | 7digits (decimal points can be adjusted ) |
| Digit of volume | 6digits (decimal points can be adjusted ) |
| Digit of unit price | 5digits (decimal points can be adjusted ) |
| Totalizer of sale | 0~42949672.95Â |
| Totalizer of volume | 0~42949672.95Â |
| Model | Product | Nozzle | Display | Package(mm) | Gross weight | |
| SK56Z/G/QF424B | 2 | 4 | 2 | 1/side | 1318*820*2480 | 367/397 |
| SK56Z/G/QF632B | 3 | 6 | 4 | 2/side | 1318*820*2480 | 427/457 |
| SK56Z/G/QF422B | 2 | 4 | 2 | 1/side | 1318*820*2480 | 367/397/315 |
| SK56Z/G/QF632B | Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3 | 6 | 2 | 1/side | 1318*820*2480 | 427/329 |
| SK56Z/G/QF842B | 4 | 8 | 2 | 1/side | 1318*820*2480 | Â |
| Z :   Vane pump   G: Gear pump  Q: Submersible pump | ||||||
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
For SUMITOMO Cylinder Seal Kit
Maintenance of Sumitomo hydraulic cylinder seals
Daily maintenance and upkeep can effectively solve the sealing problem of hydraulic cylinders, extend the service life of hydraulic cylinders, and improve the work efficiency of construction machinery.
1. Regularly check the wear of the hydraulic cylinder seals, and if severe wear is found, it should be replaced in a timely manner.
2. Clean the hydraulic cylinder seals to prevent impurities such as dust and sand from entering the interior of the seals.
3. Use appropriate hydraulic oil and avoid using expired or non compliant hydraulic oil to avoid damage to the hydraulic cylinder seals.
4. Avoid using hydraulic cylinders under excessive pressure or load to avoid damage to the seals.
5. Regularly check the liquid level and pressure of the hydraulic cylinder to ensure its normal operation and avoid damage to the sealing components due to hydraulic cylinder failures.
6. When the hydraulic cylinder is stopped for a long time, regular maintenance should be carried out, such as applying anti rust oil, to prevent aging or deformation of the sealing components.
For Sumitomo Cylinder Seal Kit, For Sumitomo Center Joint Seal Kit, Sumitomo Center Joint Seal Kit, Sumitomo Bucket Cylinder Seal Kit
Safe Seal Technology Co., Ltd. , https://www.jolseals.com