Shanghai Stock 6135 Series Diesel Engine 180kw Diesel Generator Set

Model NO.: FM180GF
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Ordinary
Excitation Mode: AC Rotating Exciter
Transport Package: Plywood Package
Origin: China
HS Code: 8502120000
Model NO.: FM180GF
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Ordinary
Excitation Mode: AC Rotating Exciter
Transport Package: Plywood Package
Origin: China
HS Code: 8502120000
Product Description
  1. Main technical parameter for generator set
brand Green power
manufacturer made in china
The unit type FM180GF
power of the assembling unit 180KW/225kva
power factor 0.8
starting mode electrical starting
output voltage 400/230V
current output 324A
mode of connection three-phase four-wire
rated frequency 50HZ

Shanghai Stock 6135 Series Diesel Engine 180kw Diesel Generator Set
  1. Introduction to diesel engine
This series of generator sets are made by Shanghai diesel engine co., LTD., which produces series H series, D series, E series, G series and W series power station diesel engines as power, and equipped with famous brand generator. The unit has the characteristics of high pressure regulating precision, good dynamic performance, low voltage waveform distortion, high efficiency, reliable work, long service life and good economic performance. The unit is equipped with a full set of no-maintenance battery startup system. The user can start the unit with the injection of oil and anti-freeze liquid and switch on the switch, so as to output power and improve the convenience of use.
  1. Generator parameter
The nonlinear load voltage waveform is less distorted
Strong short circuit endurance
The stator winding is impregnated by vacuum pressure and covered with dampproof epoxy insulating paint
The rotor and exciter are treated with high temperature resistant insulating resin paint, which is more suitable for use in bad environment
H grade insulation
The rotor silicon steel plate is mechanically tightened
Shanghai Stock 6135 Series Diesel Engine 180kw Diesel Generator Set

 
model power
KW    KVA
electricity
A
Diesel engine model number of cylinders Cylinder diameter
mm
lubricating oil capacity
L
oil wear
g/kw.g
The unit size
L×W×H
The unit weight
kg
FM50GF 50 62.5 90 SC4H95D2 4 135*140 25 232 2200*800*1380 1500
FM75GF 75 93.75 135 SC4H15D2 4 135*150 25 225 2300*900*1300 1600
FM100GF 100 125 180 SC4H160D2 4 105*124 13 193 2500*900*1500 2000
FM120GF 120 150 216 SC4H180D2 4 135*150 28 226 2600*900*1550 2250
FM150GF 150 187.5 270 SC7H230D2 6 105*124 17.5 199 2600*900*1550 2300
FM170GF 170 212.5 306 SC7H250D2 6 114*135 19 198 2600*900*1600 2400
FM180GF 180 225 324 SC8D280D2 6 114*144 19 198 2600*1050*1600 2400
FM200GF 200 250 360 SC9D310D2 6 114*144 19 198 2600*1050*1600 2600
FM220GF 220 275 396 SC9D340D2 6 135*150 33 225 3000*1280*1650 2650
FM250GF 250 312.5 450 SC13G355D2 6 135*150 33 225 3000*1280*1650 2800
FM250GF 250 312.5 450 SC13G420D2 6 135*150 33 225 3000*1280*1650 2800
FM300GF 300 375 540 SC12E460D2 6 128*153 37 192 3000*1280*1700 3450
FM320GF 320 400 576 SC15G500D2 6 135*165 33 200 3200*1350*1850 3500
FM350GF 350 437.5 630 SC15G500D2 6 135*165 33 202 3200*1350*1900 3500
FM400GF Bitumen Heating Storage Equipment

Asphalt heating storage equipment is an important road construction equipment, mainly used to heat and store asphalt in order to carry out road construction and maintenance when needed. The equipment has the characteristics of high efficiency, safety and environmental protection, and can provide stable asphalt supply for road construction.

Asphalt heating storage equipment is mainly composed of heating device, storage tank and control system. The heating unit uses oil or gas burners to transfer heat to the asphalt to heat it to the proper temperature. Storage tanks are large containers used to store heated asphalt, generally made of high-temperature resistant materials. The control system is responsible for monitoring the operating status of the equipment and the temperature of the asphalt to ensure the safe and stable operation of the equipment.

The heating principle of asphalt heating storage equipment is to transfer heat to asphalt through thermal conduction, so that it is heated. Heating devices are generally divided into direct heating and indirect heating in two ways. Direct heating is the use of the burner directly into the storage tank, hot air through the contact of hot air with the asphalt to heat it. Indirect heating is the use of heat exchangers to heat the asphalt in the storage tank without direct contact with the air. The two heating methods have advantages and disadvantages, and need to be selected according to the actual situation.

Asphalt heating storage equipment heating speed, can quickly heat asphalt to the use of temperature, improve production efficiency. At the same time, the equipment also has environmental protection characteristics, reducing exhaust gas and smoke emissions, reducing the impact on the environment. In addition, the operation of asphalt heating storage equipment is simple and easy to maintain, which can meet the needs of various road construction and maintenance projects.

In short, asphalt heating storage equipment is an important road construction equipment, with high efficiency, safety, environmental protection and other characteristics. It can provide a stable supply of asphalt for road construction, improve construction efficiency, reduce the impact on the environment and waste of resources. The equipment has a wide application prospect in the field of road construction.

Bitumen Heating Storage Equipment,Bitumen Tank Container,Gas Thermal Oil Heater,Asphalt Storage Tank Equipment

BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockplant.com