Stainless Steel304/316 Lifting DIN580 Eye Bolt with Certificate

Dear Customers:
Welcome To Qing Dao Hisender Rigging Hardware CO.,LTD&Hope Our Products & Service Will Satisfy with You.
We're professional manufacturer&exporter from 2002&have own factory can Control Every Step Of Products.
If You Need Any Of : Wire Rope Clamp ,Turnbuckle, Shackle,Wire Rope,Hook,Thimble,Link Chain ,Stainless Steel Rigging Marine Hardware ,DIN580&DIN582 And So On ,Pls Contact  Us without any hesitation,
We'll Make Response For You Within 6 Hours.
We are always ready to supply you the best service and competitive factory  price .
Just give us  a chance ,we will do all our best for you By Qing Dao Hisender Rigging Hardware .

Good Reputation is much more Important than Golden.

1) Product  Description :

2) Δ Other Names:
     ΔDIN580 Liftiing Eye Bolt
      ΔDIN580 Locking Eye Bolt
      ΔDIN580 Eye Screw
 
3) Δ More Information for your reference :
4) Use Information for your reference :
How should you select the right eye bolt?
Use plain or shoulderless eye bolts or ring bolts for vertical loading only.
Angle loading on shouderless eye bolts will bend or break them.
Use shoulder eye bolts for vertical or angle loading.

How should you use stainless steel eye bolts safely?
Orientate the eye bolt in line with the slings. If the load is applied sideways, the eye bolt may bend.
Pack washers between the shoulder and the load surface to ensure that the eye bolt firmly contacts the surface.
Ensure that the nut is properly torqued.
Engage at least 90% of threads in receiving a hole when using shims or washers.
Attach only one sling leg to each eye bolt.
Inspect and clean the eye bolt threads and the hole.
Screw the eye bolt on all the way down and properly seat.
Ensure the tapped hole for a screw eye bolt (body bolts) has a minimum depth of one-and-a-half times the bolt diameter.
Install the shoulder at right angles to the axis of the hole.
The shoulder should be in full contact with the surface of the object being lifted.

5) Part of applications for your reference :

6) Specilizing in Manufacturing : 
DIN580,DIN582,JIS1168,JIS1169,kinds of eye bolt with nut according to customer request .

7) Mainly export to : 
European countries, USA, Canada, Australia,  Japan, Korea, Singapore and so on.

8) Capacity :
We have our own factory and we can control every step ourseves .

9) Samples:
Free samples can be posted if needed for check and test .





Waiting for  our pleasure cooperations.
Good Reputation is much more Important than Golden. Dear Customers:
Welcome To Qing Dao Hisender Rigging Hardware CO.,LTD&Hope Our Products & Service Will Satisfy with You.
We're professional manufacturer&exporter from 2002&have own factory can Control Every Step Of Products.
If You Need Any Of : Wire Rope Clamp ,Turnbuckle, Shackle,Wire Rope,Hook,Thimble,Link Chain ,Stainless Steel Rigging Marine Hardware ,DIN580&DIN582 And So On ,Pls Contact  Us without any hesitation,
We'll Make Response For You Within 6 Hours.
We are always ready to supply you the best service and competitive factory  price .
Just give us  a chance ,we will do all our best for you By Qing Dao Hisender Rigging Hardware .

Good Reputation is much more Important than Golden.

1) Product  Description :

2) Δ Other Names:
     ΔDIN580 Liftiing Eye Bolt
      ΔDIN580 Locking Eye Bolt
      ΔDIN580 Eye Screw
 
3) Δ More Information for your reference :
4) Use Information for your reference :
How should you select the right eye bolt?
Use plain or shoulderless eye bolts or ring bolts for vertical loading only.
Angle loading on shouderless eye bolts will bend or break them.
Use shoulder eye bolts for vertical or angle loading.

How should you use stainless steel eye bolts safely?
Orientate the eye bolt in line with the slings. If the load is applied sideways, the eye bolt may bend.
Pack washers between the shoulder and the load surface to ensure that the eye bolt firmly contacts the surface.
Ensure that the nut is properly torqued.
Engage at least 90% of threads in receiving a hole when using shims or washers.
Attach only one sling leg to each eye bolt.
Inspect and clean the eye bolt threads and the hole.
Screw the eye bolt on all the way down and properly seat.
Ensure the tapped hole for a screw eye bolt (body bolts) has a minimum depth of one-and-a-half times the bolt diameter.
Install the shoulder at right angles to the axis of the hole.
The shoulder should be in full contact with the surface of the object being lifted.

5) Part of applications for your reference :

6) Specilizing in Manufacturing : 
DIN580,DIN582,JIS1168,JIS1169,kinds of eye bolt with nut according to customer request .

7) Mainly export to : 
European countries, USA, Canada, Australia,  Japan, Korea, Singapore and so on.

8) Capacity :
We have our own factory and we can control every step ourseves .

9) Samples:
Free samples can be posted if needed for check and test .





Waiting for  our pleasure cooperations.
Good Reputation is much more Important than Golden.

Compression Molding

Compression molding is a manufacturing process that uses a cavity half and a core half of a mold to form material into a specific shape created by the two mold halves. Compression molds vary depending on the material being compressed and the dictates of the type of mold required.

Typically, a compression mold is mounted in a vertical press (unlike the horizontal presses that are prevalent in the Injection Molding process). Compression molding often requires that the [charge" of material be loaded into the mold, either manually or automatically, prior to the mold halves closing.

• The loss of raw materials is small and will not cause too much loss (usually 2% to 5% of the product quality).
• The shrinkage of the product is small and the repeatability is good.
• A mold with a large number of cavities can be placed on a given template, and the productivity is high.
• It can be adapted to automatic feeding and automatic removal of products.
• High production efficiency, easy to realize specialized and automated production.
• The product has high dimensional accuracy and good repeatability.
• The surface is smooth and clean without secondary modification.
• Products with complex structures can be formed at one time.
• Mass production, relatively low price.

we ever did many compression silicon parts , the hardness from 30shore A till 80shore A, colors can be customized whatever you want, we can do the compound color for you. Several free samples for the review before the overall demand running to ensure everything is clear and aligned to go. Please contact us for the professional suggestions, we have been in this field for more than 15years. thanks.

Compression Molding,Compression Forming,Rubber Compression Molding,Compression Moulding Process

Suzhou FCE precision electronics Co., LTD , https://www.fukeyifcesz.com