1.More reasonable structure.
2.High E/R.H value.
3.Verg suitable for the large wharf.
4.Good energy absorption to reaction force ratio
5.Integrated and fully-embedded fender flanges make assembly & installation simple.
6.Large fender footprint with good force distribution could lead to relative light panel constuction.
7.Good shear force resistance due to the large diameter of the fender flangesuper cell rubber
Specification:
Â
| Specification | H (mm) |
ØW (mm) |
ØB (mm) |
D (mm) |
n x d (mm) |
| SC400H | 400 | 650 | 550 | 25 | 4*30 |
| SC500H | 500 | 650 | 550 | 25 | 4*32 |
| SC630H | 630 | 840 | 700 | 25 | 4*39 |
| SC800H | 800 | 1050 | 900 | 30 | 6*40 |
| SC1000H | 1000 | 1300 | 1100 | 35 | 6*47 |
| SC1150H | 1150 | 1500 | 1300 | 37 | 6*50 |
| SC1250H | 1250 | 1650 | 1450 | 40 | 6*53 |
| SC1450H | 1450 | 1850 | 1650 | 42 | 6*61 |
| SC1600H | 1600 | 2000 | 1800 | 45 | 8*61 |
| SC1700H | 1700 | 2100 | 1900 | 50 | 8*66 |
| SC2000H | 2000 | 2200 | 2000 | 50 | 8*74 |
| SC2250H | 2250 | 2550 | 2300 | 57 | 10*74 |
| SC2500H | 2500 | 2950 | 2700 | 70 | 10*74 |
| SC3000H | 3000 | 3350 | 3150 | 75 | 12*90 |
Applications:
1. Frontal berthing is fixed on frontal fender in an effort to alleviate stress acted upon sides of ship. According to specific demand, surface stress can drop to as low as 25t/m2. Thus, it is particularly suitable for berthing of large vessels.
2. Owing to high reaction force energy absorption per unit, it is can excellently meet the requirements of open sea wharf and dolphin type berth.
Â
Product Parameters
Pneumatic Driven Fan Bar Plate(plate-fin) Heat Exchanger Series
Features:
Aluminum bar plate fin structure, coupled with high-performance air pump motor and high-strength fan leaves, in the complex working conditions for a long time to work.
Application:
air compressor gas cooling.
Technical Parameters:
The displacement of the motor in the table is for reference only and can be adjusted according to the actual working conditions and requirements.
Motor in and out of the oil is bidirectional, the standard configuration for the suction type.
Maximum operating pressure: 100psi Best use pressure: 70psi Applicable temperature: -10 ℃ ~ 70 ℃
The noise value is a value at a distance of 1 m.
Pneumatic Fan Heat Exchanger,Pneumatic Driven Fan Heat Exchanger,Industrial Water Air Cooler,Elevator Hydraulic Oil Cooler
Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.nl