Supply Brushless DC 12 V Solar Submersible Water Pumps

Model NO.: TY15101603
Application: Submersible Pump, Clarified Water Pump, Fountain
Size: 46X45X35
Weight: 0.12kg
Package: Neutral Packing
Trademark: Pumtip
Specification: CE
Origin: Ningbo China
Model NO.: TY15101603
Application: Submersible Pump, Clarified Water Pump, Fountain
Size: 46X45X35
Weight: 0.12kg
Package: Neutral Packing
Trademark: Pumtip
Specification: CE
Origin: Ningbo China
Voltage Frequency Power Output H-Max Weight Dimensions
V Hz W L/H M kg MM
9~12 50/60 4~5 500 1.5~2 0.12 46X45X35

Product features:
1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
 
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show

 

Voltage Frequency Power Output H-Max Weight Dimensions
V Hz W L/H M kg MM
9~12 50/60 4~5 500 1.5~2 0.12 46X45X35

Product features:
1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
 
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show

 

Boron Stable Isotope

Stable isotopes are naturally occurring isotopes that cannot be detected by current technical means. They are widely used in research and production fields such as nuclear power industry, medicine, food, agriculture, ecology, and geology.

The stable boron isotopes developed and produced by ZSEM mainly include boron 10 acid, boron 11, boron trifluoride complexes, etc., which can be used as Nuclear Power Safety Materials, semiconductor chip manufacturing process materials, and biopharmaceuticals.



Boron Stable Isotope,Semiconductor Material Intermediate,Semiconductor Industry Dopants,Semiconductor Brominating Agent

Shandong Zhongshan Photoelectric Materials Co., Ltd , https://www.zshcchem.com