The biggest difference between a large engraving and milling machine and a general carving machine is its mechanical spindle. Compared to ordinary carving machines, it has many advantages.
The following Xiao Bian will simply introduce to you the advantages of the large sculpting machine spindle:
First, in terms of work efficiency, its mechanical spindle is superior. It can change the speed in a continuous fine-tuning manner, so it is possible to control the cutting speed throughout the machining process to obtain maximum machining efficiency.
Secondly, in terms of the noise it produces, its grade can already reach G1, that is to say, its spindle has very little noise at high speeds. In the process of using the carving machine in general, the noise is relatively large, affecting people's lives and the body of the workers.
In addition, high-precision bearings and high-precision parts manufacturing can easily meet the requirements of higher processing production.
In addition, in terms of running speed, the mechanical spindle of the large sculpting and milling machine adopts high-speed, precision matched bearings, rigid or elastic pre-tightening structures, and can obtain higher rotation speeds, so that the cutting tools can exert a cutting effect.
With the continuous improvement and improvement of related technologies in China, it is believed that the large-scale carving machine will be more comprehensive and use a wider range.
1.The classification:
The classification of fiber glass purification tower : Wet Exhaust Gas Cleaning and Dry Exhaust Gas Scrubber.Wet Exhaust Gas Cleaning divided into : packed tower, scrubber tower, desulfurizing tower,Swirl plate tower ,bubble cap tower,stripping tower,absorbing tower; Dry Exhaust Gas Scrubber divided into: activated carbon adsorption tower ,SDG dry acid waste gas adsorption tower . It apply to dispose harmful gas: sulfuric acid mist (H2SO4), hydrogen chloride (HCL) gas and hydrogen (HF) gas, chromium acid (CrO3), hydrogen gas (HCN), hydrogen sulfide (H2S), ammonia (NH3), nitrogen oxide (NOx), organic acid, benzene e,etc. The adopted way is different according to different waste gas.It is more better that using dry adsorption way for organic waste gas, and using wet purification or wet+dry adsorption way for Inorganic acid .
2.Introduction of two main type
A) Dry Exhaust Gas Scrubber:Dry scrubber use a catalyst to remove toxic components by chemisorption or adsorption to their surface. The required contact time is very short and does not depend on the inlet concentration. When most of the material has reacted, the cartridge with the catalyst has to be exchanged. This abatement method can be used for almost all processes used in the microelectronic industry. It does not require power, gases, or water for the gas cleaning. However, it requires maintenance. The catalyst has to exchanged regularly and the waste material has to be disposed. Adsorber material mixed with some color agent or indicator is used to indicate in a special window, when 90% of the catalyst has been used and the material needs to be exchanged. It is possible to install an automatic alarm based on an electronic color sensor.
B) Wet Exhaust Gas Cleaning:A wet scrubber is a simple method to clean exhaust air or exhaust gas and remove toxic or smelling compounds. In the flue gas scrubber, the gas gets in close contact with fine water drops in a co-current or counter current flow. This method is more effective when the water drop size gets smaller and the total surface between water or washing fluid and the gas gets larger. The water or washing fluid is recirculated normally in order to save water and reduce the amount of waste water.
3.Application:
Acid gas: sulfuric acid, HLC, nitric acid, HF etc.
Alkali gas: NAOH, KOH, NHS etc.
Organic gas: benzenes, alcohols, phenols.
We used different absorption solvent for dealing with different harmful gas.
4.Attention:
1. This purification tower should be installed on anti corrosion basis which is higher 100mm than ground. Pump with acid resistance should be on another anti corrosion basis.
2. This equipment should be installed indoor, in order to prevent cold weather from effecting on equipment and absorption solvent.
3. If there is no PH controlling system, PH of acid or alkali solvent should be checked regularly, and consistency should be adjusted at any time.
4. Spray-head and filling material should be checked regularly, in order to avoid plugging, any problems should be solved immediately.
5.Technical parameter:
Name
Air flow
Relative pump
Relative fan
Quantity of solvent
Weight of column body and total
absorption solvent
Model
m3/h
Pump
Motor
Fan
Motor
KG
KG
kw
kw
1
2000-2600
40FSB-15L
2.2
4-72 5A
1.2
840
1280
2
5000-6000
40FSB-20L
3
4-72 5A
2.2
1820
2420
3
8000-10000
50FSB-25L
4
4-72 6A
4
3200
3900
4
14000-15000
65FSB-32L
5.5
4-72 6C
7.5
4200
5000
5
18000-20000
80FSB-20L
5.5
4-72 7C
11
5400
6400
6
24000-26000
100FSB-32L
5.5
4-72 8C
15
6600
7800
7
30000-35000
100FSB-32
15
4-72 10C
18.5
7200
8200
8
40000-45000
1000FSB-32
15
4-72 10C
30
8100
12000
9
50000-60000
1000FSB-32
15
4-72 12C
37
10048
15000
Waste Gas Treatment Equipment.
Fdg Absorption Equipment, Waste Gas Equipment, Absorption Tower
Shandong Qufu Xingbang Heavy Equipment Co., Ltd. , http://www.chinaxingbangheavyindustry.com