The diesel engine of the generator set is an internal combustion engine that reciprocates and compresses the ignition. It is extremely important to understand the structure and function of the engine and to perform maintenance and management. Here, Ito introduces the body and the cylinder head, the piston, and the Rod and crankshaft components, distribution system, fuel system. If you need professional diesel generator set technical support, welcome to inquire
Body and Cylinder Head: The body material is alloy cast iron. In order to improve the strength of the body, rigidification is performed from the center line of the crankshaft. At the same time, the diesel engine also uses replaceable wet cylinder liners. Each cylinder has a cover. Each cylinder head is equipped with a replaceable valve seat and valve guide.
Piston, connecting rod, and crankshaft assembly: The crankshaft is a forged part with a counterweight. The replaceable radial oil seals on the crankshaft and flywheel prevent lubrication from seeping through the crankcase. The connecting rods are made of swaged, obliquely slotted teeth positioned so that they can be removed from the top of the cylinder block along with the piston. The crankshaft and the ballast bearing use typical steel back lead copper alloy bearings. The piston uses internal cooling oil to cool the piston head. When the heat load is too high, the piston is cooled by the oil passageway of the piston head to prevent the piston from cracking and sticking. In order to achieve the desired cooling effect, the design of the oil passages, nozzles, and location, as well as the flow of oil in the oil passages, are critical.
Gas distribution system: The rear gear drive is located on the inner side of the flywheel housing and is wrapped around tongue crankshaft gears, camshaft gears, oil pump gears, and fuel injection pump gears. Valves are driven by the camshaft via tappets, push rods, and rocker arms.
Diesel engine gas distribution system
Fuel system: The fuel pump sends the fuel to the diesel filter and enters the fuel injection pump. Then it enters the injector through the high-pressure fuel pipe. High-pressure fuel is injected into the cylinder through the injector, and the remaining fuel is returned to the fuel tank through the relief valve of the injector of the diesel engine.
Related reading :
Shanghai Ito Power Co., Ltd. Main : Ito Gasoline Generator , Ito Diesel Generator , Ito Small Pump , Ito Digital Generator , Ito Electric Welding Machine
Bending Product
A bending product is a type of product that is created by bending or shaping a material into a specific shape or form. This process is often used in manufacturing to create products such as metal pipes, tubing, and sheet metal components.
Bending Products can be made from a variety of materials, including metals such as steel, aluminum, and copper, as well as plastics and other materials. The bending process can be done using a variety of techniques, including press bending, roll bending, and rotary draw bending.
Some common examples of bending products include:
- Metal pipes and tubing for plumbing, HVAC systems, and industrial applications
- Sheet metal components for machinery and equipment
- Bent wire products such as coat hangers and wire baskets
- Bent plastic components for consumer products and automotive applications
Bending products are often used in applications where strength, durability, and precision are important. The bending process allows manufacturers to create products that are custom-designed to meet specific requirements, and can be used in a wide range of industries and applications.
Bending Product,Expanded Metal Plate,Thick Aluminium Sheet,Mild Steel Sheet
Suzhou Gold ant Precision Sheet Metal Co.,Ltd , https://www.jmycutting.com