Benz Brake drum 3464230601-3464230001-3464230101-3464230501Â for truck/trailer/bus/truck parts
Diameter [mm] 410
Brake Surface [mm] 191
Height [mm] 237
Height 1 [mm] 54
Pitch Circle [mm] 335
Hub Bore [mm] 298
Number of Holes 10
Bore [mm] 23
Weight [kg] 52,3
|
Diameter [mm] |
410 |
| Brake Surface [mm] | 191 |
| Height [mm] | 237 |
| Height 1 [mm] | 54 |
| Pitch Circle  [mm] | 335 |
| Hub Bore  [mm] | 298 |
| Number of Holes | 10 |
| Bore [mm] | 23 |
| Weight [kg] | 52,3 |
Our products Advantage
1.Credibility of the enterprise;
 2.OEM quality standard guaranteed;
 3.Sample purpose order accepted;
 4.Standard materrial according to technical drawing;
 5.Able to produce according to specification with technical drawing;
 6.Positive customer feedback from domestic and international market.
If you are interested in that feel free to contact to me.Hope we can cooperate with you in the future.
www.yadongbrakes.com
In additional ,we can produce the new products according to your drawing or samples in a short time .
1) good quality;
2) competitive price;
3) Quality Control and OEM service
4) professional experience and good after-sales service;
Our products Scope
 We are manufacturer specializing in all typical brake drums for trucks such as SCANIA / VOLVO / MERCEDES BENZ / BPW / RENAULT / DAF / MAN/ STYER HOWO / IVECO / KAESSB OHRER / KESSLER / MAZ / SAUER SAF / ROR / TRAILER / GUNTE WEBB / KIC / FUWA / NIHO / NISSAN / JAPAN / MITSUBISHI FOSO / YORK / FRUEHAUF/Others
(1)Product Specifications
|
 Material |
i)  alloy cast irons, gray iron, Ductile iron parts (G3000, G3500, GG20, GG25,GG30, GG35, GGG40, GGG50 and GGG60 15%Cr-Mo, L-NiCuCrl562.1563) , ii) grey high-carbon cast iron iii) high-silicon,high carbon contents |
|
     Weight |
30-70 kg |
|
Chemical   composition |
C: 3.35-3.7% Si: 1.3-2.1% Mn:0.5-1.05% P ≤ 0.12%  S: ≤ 0.10% |
|
  Casting Charactor |
FQ and diameter Per client's requirement |
|
    Design |
Technical expert take in charge of making drawings for the samples offered by clients As the customer drawing.As the ustomer sample. |
|
  Test requriment |
Each piece should be strictly tested, Eg. Blance Test, Round Jumpness Test |
|
  Mechnical property |
tensile strength>255N/mm2  degree of hardness:197-241HB  |
|
  |
 |
|
     Packing |
Inner packing: Wooden pallet, 16/20 pcs wrapped film Outer packing: Steel rope with16/20 pcs wrapped Film Wood pallet & Waterproof membrane,As the customer requirement |
U tube heat exchanger is suitable for the large temperature difference between tube side and shell side. The shell side media is easy to scale and needs cleaning, while the tube side media is clean and not easy to scale. It is also suitable for high temperature, high pressure, fluid corrosive working conditions.
Each heat exchange tube is bent into U-shape, the two ends are fixed in the upper and lower areas of the same Tube Sheet, and divided into two chambers of inlet and outlet with the partition in the tube box. This kind of heat exchanger completely eliminates the thermal stress, the structure is simpler than the floating type, but the tube side is not easy to clean.
The number of tubes is small, the utilization of the tube sheet is not frequent, and the shell side fluid is easy to short circuiting, which is unfavorable to heat transfer. If there is a leak or damage in the tube, the external U-tube can be replaced, while the broken inner tube can not be replaced, only plugged, and one broken U-tube means two broken, so the U-tube easily scrapped.
U Tube Heat Exchanger,Beu Heat Exchanger,U Type Heat Exchanger,U Tube Type Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com