MD300 Metal Detector Gold Century Hand Held Metal Detector

Hot sale MD300 hand held metal detector

MD300 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army. Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate. High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application. The best about this model is that, it's most cost-efficient among models of the same category.

MD-300 type metal detector is a small hand-held metal detector,designed to safeguard sensitive areas like schools, courtrooms, corrections facilities, sports events, businesses,night clubs, bars and other public areas and events.When detecting metal, it sends an alarm sound and vibration, and the power supply has a low voltage indicator.The operation is simple, exquisite design, easy to save, low failure rate.

 

Package include:

1 x metal detector

1 x english manual

 

Key features of MD300 hand held metal detector:
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

 

Parameters of MD300 hand held metal detector:

Applications of MD300 hand held metal detector: 
airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
medicine, food , commercial quality inspection system;
precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .






 

Hot sale MD300 hand held metal detector

MD300 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army. Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate. High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application. The best about this model is that, it's most cost-efficient among models of the same category.

MD-300 type metal detector is a small hand-held metal detector,designed to safeguard sensitive areas like schools, courtrooms, corrections facilities, sports events, businesses,night clubs, bars and other public areas and events.When detecting metal, it sends an alarm sound and vibration, and the power supply has a low voltage indicator.The operation is simple, exquisite design, easy to save, low failure rate.

 

Package include:

1 x metal detector

1 x english manual

 

Key features of MD300 hand held metal detector:
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

 

Parameters of MD300 hand held metal detector:

Applications of MD300 hand held metal detector: 
airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
medicine, food , commercial quality inspection system;
precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .






 

Description

Lost Wax Casting uses molten materials to manufacture fused module,and then coat the module surface with multilayer refractory material.Until dry and curing,the module will be heated and burned out pattern materials,through high temperature molten and poured into molten metal,the castings will obtain after cooling and solidification.

Lost wax casting(also called by its French name,cire perdue)is the process by which a metal sculpture is cast from an artist`s sculpture.Now this ferrous metal casting process known as investment casting is a foundry technique with a little cutting or no cutting.Intricate works can be achieved by this casting process,primarily depending on the skills of the carvers.

Application of Lost Wax Casting

1. This investment casting is used for the production of bronze handicrafts,aerospace,weapons and shipbuilding,petrochemical engineering,machinery manufacturing,household appliances and instrumentation.The materials include brass,aluminum and steel.
2. The lost wax casting is not only suitable for various alloyed casting,but also for producing the complex and high-temperature foundry goods.

Features of Investment Casting

1. The metal castings have high dimensional accuracy and fine surface roughness.The dimension is between CT4 and CT7,and the surface roughness is generally from Ra1.6 to 6.3um.
2. Lost wax casting provides near net shape to lower material usage.
3. The lost wax investment casting can reduce expensive machining operations and eliminate expensive weldments.
4. Lost wax casting has the advantages of greater design flexibility,weight reduction,,low initial tooling costs and wide alloy selections to enhance part performance.

Investment Casting process

The metal castings can be made of two ways.One is the direct method which uses wax model itself,and the other is the indirect method using a wax copy of a model.These are the steps for the indirect lost casting process:

1. Model-making.The mold-maker creates an original model from wax clay or other materials.
2. Wax.After the mold is completed,molten wax is poured into it and swished around until an even coating,usually about 3mm thick,covers the inner surface of the mold.
3. Chasing.A heated metal tool is used to rub out the marks that show the parting line or flashing where the pieces of the mold came together.
4. Spruing.The wax copy is sprued with a treelike structure of wax which will provide paths for molten casting material to flow and air to escape.
5. Slurry.The wax copy is dipped into slurry of silica,then into sand-like stucco or dry crystalline silica of a controlled grain size.
6. Burnout.The ceramic shell-coated piece is placed cup-down in kiln,whose heat hardens the silica coating into a shell,and the wax melts and runs out.
7. Testing.The ceramic shell is allowed to cool,and then is tested to see if water will flow through the feeder and vent tubes as necessary.
8. Pouring.The shell is reheated in the kiln to harden the patches and remove all traces of moisture,and then placed cup-upwards into a tub filled with sand.
9. Metal-chasing.Just as the wax copies are chased,the casting is worked until the telltale signs of the casting process are removed,and the casting now looks like the original model.

Lost Wax Casting

Lost Wax Castings, Lost Wax Precision Casting, Lost Wax Casting Parts

QINGYUN HUIHUANG EXACT CASTING CO.,LTD , http://www.sdhhcasting.com