1.Main features of Corrugated Steel Panel Roll Forming Machine
    The advantages of corrugated roof panel forming machine are as follows:
    1.The panel is widely used in modern factory,such as workshop,4S auto shop,
    is a new popular roof panel and wall cladding.
    2.Easy operation, low maintenance cost
2.Detailed Images of Corrugated Steel Panel Roll Forming Machine
   Machine Parts
     1) Corrugated roof panel forming machine rollersÂ
        Brand: BMS   Original: China
        Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.
    With Hard-Chrome Coating for long life.Â
        With feeding material guide,Body framemade from 450# H type steel by welding   
Â
  2) Corrugated roof panel forming machine pre-cutterÂ
        Brand: BMS   Original: China
    Avoid wasting material,easy to operate.The precutter is conneted with PLC control system,
    PLC is calculating profile length within roll forming. Once material is required to change,
    PLC is calculating the length for total and remind operator,production finishes andÂ
    able to manual shearing material before roll forming so as to change materialfor new production.
    It is the advanced function and good for production to save material, no waste.
Â
 3) Corrugated roof panel machine post cutterÂ
        Brand: BMS   Original: China
        Cutter frame made from high quality 20mm steel plate by welding
        Post cut, stop to cutting, use the same hydraulic motor drive
        Hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa        Cutting tool material: mold steel Cr12(D3 steel), Heat treatment
Â
 4) Corrugated Steel Panel Roll Forming Machine decoilerÂ
        Brand: BMS   Original: China
        Manual Decoiler: one set
        Un-powered,manually control steel coil inner bore shrinkage and stop
        Max. feeding width: 1000mm, coil ID range 470mm±30mm
        Capacity: Max. 5Ton
 6) Corrugated roof panel machine exit rack
Â
        Brand: BMS   Original: China
        Un-powered,three units
Other detailes of Corrugated Steel Panel Roll Forming Machine
Suitable for material with thickness 0.3-0.8mm
Shafts manufactured from 45#,Main shaft diameter=φ75mm,precision machined
Motor driving,Gear chain transmission, 19 rollers to formÂ
Main motor=5.5KW , Frequency speed control. Forming speed approx.15-20m/min
Â
PLC Control System (Touch screenbrand:German Schneider Electric/Taiwan WEINVIEW,
Inverter brand:Schneider Electric/Taiwan DELTA/SHILIN,Encoder brand:Japan Koyo/OMRON)
Combined with: PLC, Inverter, TouchScreen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
User's manual in English
Â
After-sale service of YX36.5-780 Corrugated Steel Panel Roll Forming Machine
1. The warranty of purlin roll forming machine YX36.5-780 corrugated roof panel machineÂ
  is 18months after the client receives the machine.Â
  Within the 1.5years, we will courier the replacement parts to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories with extra cost.
Terms of trade
1. Minimum order quantity (MOQ): 1 piece
2. Delivery time: about 45 workdays
3. Port of loading: port of Xiamen
4. Type of payment: by T/T or by L/C
5. Export:to more than 50 countries and regions, including Taiwan, UK, France, Ireland, Greece, Australia,Â
USA, Mexico, Brazil, Chile, Bolivia, Trinidad, Israel, Saudi Arabia, UAE, Iran, Kuwait, Yemen, India, Pakistan,
 Singapore, Malaysia, Thailand, Indonesia, Philippines, Vietnam, Myanmar, Brunei, South Africa, Zimbabwe,Â
Mozambique, Zambia, Congo, Cameroon, Sudan, Ethiopia, Nigeria, Guinea, Algeria, Libya and Egypt, Russia,etc.
Â
1.Main features of Corrugated Steel Panel Roll Forming Machine
    The advantages of corrugated roof panel forming machine are as follows:
    1.The panel is widely used in modern factory,such as workshop,4S auto shop,
    is a new popular roof panel and wall cladding.
    2.Easy operation, low maintenance cost
2.Detailed Images of Corrugated Steel Panel Roll Forming Machine
   Machine Parts
     1) Corrugated roof panel forming machine rollersÂ
        Brand: BMS   Original: China
        Rollers manufactured from high quality 45# steel, CNC lathes, Heat Treatment.
    With Hard-Chrome Coating for long life.Â
        With feeding material guide,Body framemade from 450# H type steel by welding  Â
Â
  2) Corrugated roof panel forming machine pre-cutterÂ
        Brand: BMS   Original: China
    Avoid wasting material,easy to operate.The precutter is conneted with PLC control system,
    PLC is calculating profile length within roll forming. Once material is required to change,
    PLC is calculating the length for total and remind operator,production finishes andÂ
    able to manual shearing material before roll forming so as to change materialfor new production.
    It is the advanced function and good for production to save material, no waste.
Â
 3) Corrugated roof panel machine post cutterÂ
        Brand: BMS   Original: China
        Cutter frame made from high quality 20mm steel plate by welding
        Post cut, stop to cutting, use the same hydraulic motor drive
        Hydraulic motor: 2.2KW, Hydraulic pressure range: 0-12Mpa        Cutting tool material: mold steel Cr12(D3 steel), Heat treatment
Â
 4) Corrugated Steel Panel Roll Forming Machine decoilerÂ
        Brand: BMS   Original: China
        Manual Decoiler: one set
        Un-powered,manually control steel coil inner bore shrinkage and stop
        Max. feeding width: 1000mm, coil ID range 470mm±30mm
        Capacity: Max. 5Ton
 6) Corrugated roof panel machine exit rack
Â
        Brand: BMS   Original: China
        Un-powered,three units
Other detailes of Corrugated Steel Panel Roll Forming Machine
Suitable for material with thickness 0.3-0.8mm
Shafts manufactured from 45#,Main shaft diameter=φ75mm,precision machined
Motor driving,Gear chain transmission, 19 rollers to formÂ
Main motor=5.5KW , Frequency speed control. Forming speed approx.15-20m/min
Â
PLC Control System (Touch screenbrand:German Schneider Electric/Taiwan WEINVIEW,
Inverter brand:Schneider Electric/Taiwan DELTA/SHILIN,Encoder brand:Japan Koyo/OMRON)
Combined with: PLC, Inverter, TouchScreen, Encoder, etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
User's manual in English
Â
After-sale service of YX36.5-780 Corrugated Steel Panel Roll Forming Machine
1. The warranty of purlin roll forming machine YX36.5-780 corrugated roof panel machineÂ
  is 18months after the client receives the machine.Â
  Within the 1.5years, we will courier the replacement parts to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories with extra cost.
Terms of trade
1. Minimum order quantity (MOQ): 1 piece
2. Delivery time: about 45 workdays
3. Port of loading: port of Xiamen
4. Type of payment: by T/T or by L/C
5. Export:to more than 50 countries and regions, including Taiwan, UK, France, Ireland, Greece, Australia,Â
USA, Mexico, Brazil, Chile, Bolivia, Trinidad, Israel, Saudi Arabia, UAE, Iran, Kuwait, Yemen, India, Pakistan,
 Singapore, Malaysia, Thailand, Indonesia, Philippines, Vietnam, Myanmar, Brunei, South Africa, Zimbabwe,Â
Mozambique, Zambia, Congo, Cameroon, Sudan, Ethiopia, Nigeria, Guinea, Algeria, Libya and Egypt, Russia,etc.
Â
Dumbwaiter Lift,Food Elevator,Goods Elevator
Deao Elevator Co., Ltd. , http://www.js-elevator.com