2. Safe for tyre sensor
3. Require no tools or jacks
4. Safe to store in your vehicle's tire well.
Features:
I-like tire sealer and Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate and Go!
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
| Â Item No: | Â ID-309 |
| Â Can Size: | Â 65mm*158mmH |
| Â Package | Â 650mm*12pcs/ctn |
| Â Carton Size | Â 275*205*290mm |
| Â 20ft Container Loading | Â 1845 cartons |
2. Safe for tyre sensor
3. Require no tools or jacks
4. Safe to store in your vehicle's tire well.
Features:
I-like tire sealer and Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate and Go!
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
| Â Item No: | Â ID-309 |
| Â Can Size: | Â 65mm*158mmH |
| Â Package | Â 650mm*12pcs/ctn |
| Â Carton Size | Â 275*205*290mm |
| Â 20ft Container Loading | Â 1845 cartons |
Shutter Doors And Windows Roll Forming Machinery is for making the color steel rolling shutter doors or windows, which is widely used in garage door, factory door,shop door,supermarket door and so on. And we can supply the door frame machines. There are many kinds for different countries. At the same time, for the special needs, we also produce fireproof rolling shutter doors and windows machine and anti-wind shutter door machine.
Shutter Doors And Windows Roll Forming Machinery
Door Frame Making Machine,Steel Roller Shutter Door Machinery,Window Shutter Forming Machine,Rolling Shutter Door Forming Machine,Rolling Shutter Door Frame Forming Machine,Shutter Door Frame Machine
Xianfa Roll Forming Machine Factory , http://www.btxianfa.com